A comparison analysis of the decoupling carbon emissions from economic growth in three industries of Heilongjiang province in China

Environmental Science and Pollution Research - Growing environmental pressure urges China to develop in a sustainable and low carbon way, and thus China strives to achieve a carbon peak by 2030 and...     

Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

A new approach to spatial source apportionment of haze pollution in large scale and its application in China

Long-lasting expansion of haze pollution in China has already presented a stern challenge to regional joint prevention and control. There is an urgent need to enlarge and reconstruct the coverage of joint prevention and control of air pollution in key area. Air quality models can identify and quantify the regional contribution of haze pollution and its key components with the help of numerical simulation, but it is difficult to be applied to larger spatial scale due to the complexity of model parameters. The time series analysis can recognize the existence of spatial interaction of haze pollution between cities, but it has not yet been used to further identify the spatial sources of haze pollution in large scale. Using econometric framework of time series analysis, this paper developed a new approach to perform spatial source apportionment. We applied this approach to calculate the contribution from spatial sources of haze pollution in China, using the monitoring data of particulate matter (PM_2.5) across 161 Chinese cities. This approach overcame the limitation of numerical simulation that the model complexity increases at excess with the expansion of sample range, and could effectively deal with severe large-scale haze episodes.     

基于变权灰色云模型的江苏省水环境系统脆弱性评价

水环境系统脆弱性是水资源利用与生态环境研究的热点问题，通过研究水环境系统的内在机理，综合考虑影响水环境系统脆弱性的资源、环境、经济、社会等因素，借助驱动力-压力-状态-影响-响应-管理（DPSIRM）框架构建水环境系统脆弱性评价指标体系。在此基础上，构建基于变权灰色云模型的评价方法，对2004~2014年江苏省水环境系统脆弱性进行评价。结果表明：2004~2014年水环境系统脆弱性指数由47.056提高到63.210，脆弱性等级由“重度脆弱”演化为“中度脆弱”，并长期维持在“中度脆弱的”等级，2014年出现了向“轻度脆弱”状态转变的趋势。分析各个子系统对水环境系统脆弱性影响程度可知，影响子系统和响应子系统对江苏省水环境脆弱性系统的影响程度逐年增加；而压力子系统和管理子系统对水环境系统脆弱性的影响程度逐年下降；其它子系统对水环境系统脆弱性的影响维持在一定水平小幅度波动。     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果，需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试，探究人体在不同环境温度下体表温度的变化，得出胸部、背部及额头为热量最高部位，并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型，对不同环境中的屏蔽服冷却效果展开研究，分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇，均可帮助人体降低体温，提高舒适度。     

基于复合治理理论的基层应急管理模式优化*

为弥补传统基层应急管理模式的短板，解决信息壁垒、协调困难、公众参与不足等问题。从复合性视角出发，阐述复合治理理论内涵，探讨复合治理与应急管理在主体、思维、过程、空间、目标上的契合性，并进一步分析基层应急管理的现实背景和困境，进而构建基于复合治理理论的基层应急管理模式，阐明模式基本结构和工作流程，最终提出理念树立、平台搭建、机制保障、队伍建设、制度安排、文化营造、技术支撑方面的优化路径。结果表明:复合治理理论的应用可以加强基层应急管理能力，促进多元主体协同共治。     

内窥镜检查在电站锅炉内部检验中的应用

工业内窥镜是电站锅炉内部检验中不可或缺的设备,主要用来对集箱、减温器、受热面管等内部人眼无法观察到的地方进行检验,从而确定承压部件内部是否存在严重影响锅炉安全运行的缺陷.本文通过对锅炉内窥实例进行分析和总结,阐述内窥镜检查在锅炉内检中的重要性并给相关工作人员提供借鉴与参考.     

地表水环境遥感监测关键技术与系统

本文主要是围绕地表水环境遥感检测展开讨论,全面介绍了水环境检测的关键技术和系统,建立改进双峰法的水体分布遥感提取方法,并以具体地区为例进行分析,采用不同方法建立解析方法,从根本上提升反演方法的区域和积极适用性,希望能够对相关人员起到参考性价值。