Prenatal diagnosis of femur-fibula-ulna complex by ultrasonography in a male fetus at 24 weeks of gestation

We present a case of ultrasonographic prenatal diagnosis at 24 weeks of femur—fibula—ulna (FFU) complex. To our knowledge, this is the first report of an early prenatal diagnosis of FFU.     

景观锚链的近海大气腐蚀调查研究

在2007年3月对暴露于湛江观海长廊近8年的景观锚链进行了大气腐蚀调查和研究.现场调查结果显示,各站点锚链均受到不同程度的腐蚀,锈层呈黄褐色,站点2和站点3的锈层易剥落.锚链的扫描电镜结果表明,外表面锈层疏松多孔,并伴有大量的裂纹,内表面局部存在大量诱导腐蚀发生的微孔,表面锈层中均含有S元素和Cl元素.红外光谱分析结果显示,锚链表面锈层均有α-FeOOH.大气湿热气候、高含量的Cl-和H2S是锚链钢严重腐蚀及发生块状开裂的主要因素.     

Meckel-Gruber syndrome: Prenatal diagnosis at 10 menstrual weeks using embryoscopy

A case of Meckel—Gruber syndrome was diagnosed by embryoscopy at 10 menstrual weeks, allowing for early termination of pregnancy. Post-mortem examination confirmed the presence of polydactyly and bilateral cystic lesions of the mesonephros and metanephros. Both the forming nephrons and the collecting ducts were involved in the formation of renal cysts.     

红外系统对点源目标作用距离的优化计算

作用距离是红外系统核心性能指标之一,受大气、背景等多方面因素的影响。针对传统作用距离计算方法存在的局限,综合考虑多个影响因素,提出了一种优化计算方法,首次精确计算了作用距离与实际距离之差的大气衰减值,并对计算方法进行了验证。结果表明,优化计算方法具有较好的计算精度,可用于红外系统性能预测和整体设计。     

ASTAR IR-200红外三波数测油仪自校方法

针对ASTAR IR-200红外三波数测油仪,提出仪器的自校方法。     

几种水合金属氧化物的磷酸根吸附性能

利用简单的碱沉淀法制备不同的水合金属氧化物,并对所得七种水合金属氧化物的磷酸根吸附等温线进行了系统的探讨比较.研究表明,25℃条件下,Al、Fe、Ni、Cu和Ce的水合金属氧化物对磷酸根的吸附最符合Langmuir线性吸附方程,而水合氧化锌和水合氧化钴吸附剂最符合线性等温线模型.所有这七种水合金属氧化物对磷酸根的吸附都...     

Formation of Soluble Complexes of Metals with Humic Acid and Its Environmental Significance

In order to investigate the role of functional groups present in humic acid(s) (HA) during complex formation, water soluble complexes between HA isolated from soil and metals (Pb, Ca, As, Ni, Cr, Co, Cu, Cd, Fe, Mn, Mg and Zn) were prepared and subjected to infrared (IR) spectroscopy. the IR data revealed the involvement of the - OH group of humic acid in complex formation with all metals except copper and arsenic, whereas the - COOH group of HA was found to be the preferred site of binding for all the metals. the significance of findings in relation to detoxification of environmental pollutants is discussed in this paper.     

2000年环保战略目标定量考核方法研究

参加国家环保局科技3项费用课题《2000年环境保护战略目标定量考核指标研究》的8个地区对于2000年环保战略目标提出了不同的考核方法.本文在深入分析各种考核方法的基础上,通过归纳总结,向读者推荐几种基本方法,它们是 TOPS(?)S 方法、简单加性加权法和公式计分法.这些方法是一些基本的数学手段,通过对各具体考核指标的适当综合,归纳出表征总体目标实现程度的数值.即:这些方法是整体考核方法,从整体上说明存在问题和差距,为决策者提供实现环保战略目标的科学依据.     

基于形态滤波遗传算法对目标红外图像特征检测

将形态滤波和自适应遗传算法结合起来,提出了一个用于目标检测的形态滤波器参数优化遗传算法。通过设计了形态滤波的遗传算法,寻求最佳结构元,以实现对目标的自适应检测。作为2个特殊环境中的应用检测实例,分别对固体推进器尾喷焰红外图像和复杂背景下的弱小目标进行检测。实验结果表明该方法能够更好地适应环境变化,更大程度地提高目标信号检测的信号噪声（SNR）比,有效地检测出复杂背景下的目标。     

Numerical evaluation of the effectiveness of NO2 and N2O5 generation during the NO ozonation process

Wet scrubbing combined with ozone oxidation has become a promising technology for simultaneous removal of SO₂ and NO_x in exhaust gas. In this paper, a new 20-species, 76-step detailed kinetic mechanism was proposed between O₃ and NO_x. The concentration of N₂O₅ was measured using an in-situ IR spectrometer. The numerical evaluation results kept good pace with both the public experiment results and our experiment results. Key reaction parameters for the generation of NO₂ and N₂O₅ during the NO ozonation process were investigated by a numerical simulation method. The effect of temperature on producing NO₂ was found to be negligible. To produce NO₂, the optimal residence time was 1.25 sec and the molar ratio of O₃/NO about 1. For the generation of N₂O₅, the residence time should be about 8 sec while the temperature of the exhaust gas should be strictly controlled and the molar ratio of O₃/NO about 1.75. This study provided detailed investigations on the reaction parameters of ozonation of NO_x by a numerical simulation method, and the results obtained should be helpful for the design and optimization of ozone oxidation combined with the wet flue gas desulfurization methods (WFGD) method for the removal of NO_x.