广州轨道交通三号线高速行驶条件下对安全限界的影响研究

给出了轨道交通车辆横向偏移量的计算方法 ,并应用列车 -线路动力耦合模型 ,分析了广州地铁三号线的安全限界变化问题。确定了当前按 80km/h行车速度设计的建筑限界能满足 13 0km/h行车速度的要求 ,限界尺寸不需改动可保证列车运行安全平稳     

Optimal charges on river effluent from lumped and distributed sources

We propose a modelling framework for the design of a Pigouvian effluent tax, in an environmental management problem implicating several economic agents located in a river basin. The proposed charging system allows for the agents' geographical position relative to the river's sections, at which environmental standards are to be enforced, and takes into account the possible different market structures within which the agents are operating. In particular, we consider industrial agents competing on an oligopolistic market, and a set of farmers acting as price takers on a large market. A regional authority's goal is to induce agents to some sort of cooperation which would result in the satisfaction of the common environmental constraints. The economic process on one side, and the pollution transport and accumulation on the other, constitute two dynamic processes in two different time scales. As the economic process is much slower than the other process we can neglect the latter's transients and concentrate on the time invariant steady state solutions to the transportation equation. The model thus constructed has some noncooperative game and optimal control problem's features with space being the ‘running’ variable. This revised version was published online in July 2006 with corrections to the Cover Date.     

长江常熟段排污口布置方案数值模拟论证研究

为合理确定常熟氟化工项目排污口布置方案 ,本文在分析长江常热段水环境特征的基础上 ,针对其复杂的水下地形和水流流场 ,建立了较为准确和实用的平面二维水流水质耦合数学模型 ,预测计算了三套方案污水对重点保护水域影响程度和范围 ,并从水流流场、水质影响评价、技术经济多角度对方案进行了比较论证 ,最终推荐污水江中排放的方案 ,为项目的工程设计和环境管理提供了科学依据。     

填埋场内水分运移过程双场耦合模型的探讨

基于多孔介质渗流力学和热力学理论，从填埋场内非等温的角度，理论上分析了场内垃圾含水率的分布与温度变化之间相互作用的机理，建立了垃圾填埋场内水分运移过程的双场耦合模型（三维），并提出模型的求解方法。为研究填埋场内水分的时空分布规律提供理论依据。     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

远程火箭弹高弹道飞行温度环境分析

目的在不采用防热涂层的前提下,为满足远程火箭弹高弹道飞行的防热需求,提出增加壳体厚度的设计思路。方法通过弹道耦合的气动加热计算,分析不同材料、不同厚度壳体的弹头壁面在飞行过程中的温度变化情况。结果壳体厚度达到20 mm以上时,铝、钢、铜三种材料壳体的外壁面温度均低于150℃,而相同厚度的壳体,钢壳的降温能力最强。结论增加壳体厚度可以有效降低弹头壳体壁面温度。     

CALPUFF-AERMOD大气预测模式耦合系统

AERMOD和CALPUFF在模型应用尺度、适用范围、气象与地形预处理以及特殊计算功能模块等方面具有自身的特点和优势。为了使模型系统计算结果合理科学,本文综合考虑AERMOD和CALPUFF的应用范围和特点,建立了CALPUFF-AERMOD耦合系统。以广东省东莞、中山、深圳的污染源和气象条件等资料为背景,进行污染预测模拟,以此评价模式的模拟性能,并对比CALPUFF与AERMOD的预测结果,最终计算得出的预测结果相对科学合理。     

电感耦合等离子体质谱法测定地表水中铊的研究

本研究建立了电感耦合等离子体质谱法(ICP-MS)测定地表水中铊的方法。对仪器工作条件进行了优化,用在线内标校正基体效应的干扰,重点考察了样品测定介质、酸度、共存元素干扰等因素对测定结果的影响。在最佳实验条件下,该方法的检出限可达0.003μg/L,线性相关系数不小于0.999 9,加标回收率为93%~110%。与传统的原子吸收法相比,该方法不需要富集等繁琐的前处理过程,具有检出限低、快速、精密度和准确度高等优点。     

湿地基质及阴极面积对人工湿地型微生物燃料电池去除偶氮染料同步产电的影响

本研究采用人工湿地型微生物燃料电池处理偶氮染料X-3B,实现降解偶氮染料同步产电的效果.为了构建性能最优的人工湿地型微生物燃料电池(CW-MFC)系统,本研究主要从湿地基质和阴极面积两个方面研究系统构型对去除X-3B同步产电的影响,提高系统性能.研究表明以粒径10 mm、孔隙率30%的小石子作为湿地基质构造的CW-MFC系统微生物生物量最大,去除X-3B效果最好,脱色率高达92.70%,但其产电性能最差.较小的粒径和孔隙率使底层微生物生物量增加,促进X-3B的去除,但随着湿地基质粒径和孔隙率的减小,导致阴阳极营养物质不足,系统传质阻力增加,抑制了系统产电性能.X-3B的去除效果随着阴极面积的增加而提高直到阴极面积为594 cm~2时取得最大脱色率99.41%.当阴极面积继续增加时,CW-MFC系统产电性能上升趋势趋于平缓,X-3B去除效果呈现下降趋势,这是因为阴极反应过快导致更多的阳极电子输送到阴极用于产生电流,与X-3B发生反应的电子减少,阳极成为提高CW-MFC系统性能的限制因素.     

电感耦合等离子体发射光谱法测定石化废水中的重金属

建立了硝酸加热消解后采用电感耦合等离子体发射光谱(ICP-OES)测定石化废水中重金属(As,Cd,Cr,Cu,Zn,Pb,Mn)的方法,优化了仪器工作参数,得到了线性回归方程,并对该方法进行了评价。优化后的仪器工作参数为射频功率1 150 W、雾化器流量0.70 L/min、辅助气流量0.50 L/min。各重金属元素回归方程的相关系数均在0.999 9以上,检出限为0.000 18~0.007 00 mg/L,相对标准偏差为0.1%~2.0%,加标回收率为96.3%~102.2%。该方法具有线性关系好、检出限低、精密度和准确度高、分析速度快等优点。