Simultaneous removal of cyanobacterial blooms and production of clean water by coupling flocculation with a rotary drum filter

Environmental Science and Pollution Research - A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial...     

A comprehensive review on green buildings research: bibliometric analysis during 1998–2018

Environmental Science and Pollution Research - Buildings account for nearly 2/5ths of global energy expenditure. Due to this figure, the 90s witnessed the rise of green buildings (GBs) that were...     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Special issue on contamination,remediation and health for pollutants in natural aquatic,soil, sediments and atmospheric environments

Environmental Geochemistry and Health -     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

2005-2019年我国重特大安全生产事故特征分析

为探究我国重特大安全生产事故特征,选取2005-2019年国内852起重特大事故作为研究对象,基于Python编程语言针对重特大事故发生的年份、季度、月份、工作日与非工作日、地域特征进行分析.结果表明:2005-2019年,国内重特大安全生产事故起数和死亡人数均在不断下降;第四季度发生重特大事故最多,而第三季度平均每起事故造成的死亡人数最多;重特大事故数量和死亡人数随月份显示出反复波动的趋势,均呈现3个"^",形;工作日期间发生的重特大事故数量最多,非工作日平均事故率最大;国庆节是重特大事故发生最多的节假日;贵州、湖南、山西、云南、河南等省份"十四五"期间需要重点加强安全和应急管理.     

Coincidence and Upgrade： A Typical Case Study of Rural Ecotourism Development

At present, internal rural tourism is at the stage of upgrading and renewing, and ecotourism has been considered to be the main direction. This paper discussed the concepts and criteria of rural tourism and ecotourism, analyzed a typical case of Nongke Village of Chengdu City-being considered to be the first rural tourism site in China, went deep into the problems of the contents and criteria of the development of rural ecotourism, and tried to probe into the principles of the development of rural ecotourism both theoretically and practically so as to understand the rules of the development of rural ecotourism .     

关于长江产业带建设总体布局的初步思考

重点开发长江是90年代中国经济重大战略布署。将长江产业带建设成具有强大经济实力的国家一级经济轴线,宜采用分层次推进与中心辐射相结合的发展战略,以浦东开发和三峡建设为契机,加强基础产业,发展新兴产业和第三产业,优化产业结构,以能源和交通建设先行,改善基础设施。同时,要协调产业带建设与浦东开发、三峡工程建设的关系。     

Processes involved in uptake and release of nitrogen dioxide from soil and building stones into the atmosphere

Atmospheric NO₂ was taken up by samples of various soils and building stones. The NO₂ uptake rate constants were highest in soil samples taken during the summer months. However, the NO₂ uptake rate constants of the soils and building stones were not significantly correlated with any of the following variables: moisture, pH, ammonium, nitrite, or nitrate. NO₂ uptake by soil and stone was not abolished by autoclaving indicating a chemical uptake process. NO₂ uptake by acidic and air-dry soils and stones resulted in nearly stoichiometric reduction of NO₂ to NO. This reduction was enhanced by the addition of ferrous iron and was further enhanced by incubation under 1 ppmv SO₂. The results suggest that NO₂ reduction may be coupled to oxidation of ferrous to ferric iron which may be reduced again by atmospheric SO₂ thus regenerating the ferrous iron content of the soil or stone. Conversion of NO₂ to NO was not observed in neutral or/and moist soils and stones. NO₂ was also taken up by purified and sterilized quartz sand moistend with water. This uptake was enhanced by addition of humic material but not by addition of bacteria which both had been extracted from genuine soil. Under most conditions, only uptake but no release of NO₂ was observed. However, NO₂ was released in air-dry soils that were heated to 45–65°C, or in ammonium-fertilized soil or stone that was drying up at room temperature. Under the latter conditions mimicking field practice, the NO₂ release reached rates that were similar to the NO release rates.