An experimental investigation into micro ball end-milling of silicon

Silicon is a representative operational material for semiconductor and micro-electronics. In certain MEMS applications, it is required to fabricate three dimensional channels and complex pattern on silicon substrate. Such features are typically fabricated by photolithography and chemical etching. These processes have low productivity and have certain other limitations. Therefore, a viable switch-over from non-traditional fabrication processes to traditional machining is highly desired for improved productivity in high-mix low-volume production. However, machining of silicon by traditional process is extremely difficult due to its high brittleness. Even very small forces produced during machining can cause brittle fracture on silicon surface resulting in deteriorated surface quality. The fundamental principle in machining of a brittle material such as silicon is to achieve material removal through plastic deformation rather than crack propagation. This paper presents the experimental results of ductile-mode machining of silicon by micro ball end-milling. The workpiece surface was inclined to the rotational axes of the cutter to improve the surface finish. It was established experimentally that 15-μm deep, fracture-free slots can be machined on silicon wafer by micro ball end-milling if the feed rate is below a certain threshold. The influence of several machining parameters on the roughness of machined-surface was also investigated. Cubic boron nitride (CBN) is presented as much economical alternative tool-material to single-crystal diamond for machining silicon in ductile-mode.     

The global partnership for sustainable development

This paper examines whether foreign aid, together with other economic, social and environmental factors, contributes to sustainable development. It starts with an illustrative theoretical growth model where foreign aid promotes sustainable development by protecting the environment. Using factor analysis and newly developed estimation methods for a dynamic panel data model with endogenous regressors, the empirical section of the paper finds evidence that foreign aid has had a significantly positive influence on sustainable development in aid recipient countries. This effect is very likely to go through channels related to growth and resources as well as a technology channel with respect to energy intensity. This research has important implications for a post‐2015 development framework on international collective action with regard to a sustainable future.     

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al2O3

High-surface-area mesoprous powders of γ-Al₂O₃ doped with Cu^2 +, Cr^3 +, and V^3 + ions were prepared via a modified sol–gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al₂O₃ and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane (DCE) was studied in the temperature range of 250–400°C. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu^2 +- and Cr^3 +-containing catalysts showed 100% conversion at 300°C and 350°C, V^3 +-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride (C₂H₃Cl) and hydrogen chloride (HCl) at all temperatures, Cu- and Cr-doped catalysts showed significantly stronger capability for deep oxidation to CO₂.     

Kinetic,equilibrium and thermodynamic studies for the sorption of metribuzin from aqueous solution using banana peels,an agro-based biomass

Banana peels were employed for the removal of metribuzin from aqueous solution. Sorption in the batch mode was optimized regarding pH, contact time, sorbent dose, initial pesticide concentrations, and temperature. The sorption data were fitted to pseudo-first-order, pseudo-second-order, intraparticle diffusion, Elovich, and liquid film diffusion model, the pseudo-second-order exhibiting best fit (R² = 0.9803). Of the four most common sorption isotherm models (Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich), the data followed the Langmuir isotherm with highest correlation. The maximum adsorption capacity was found to be 167 mg g^?1. Gibbs free energy, enthalpy, and entropy showed that the sorption was exothermic and spontaneous.     

An integrated fuzzy-stochastic modeling approach for risk assessment of groundwater contamination

An integrated fuzzy-stochastic risk assessment (IFSRA) approach was developed in this study to systematically quantify both probabilistic and fuzzy uncertainties associated with site conditions, environmental guidelines, and health impact criteria. The contaminant concentrations in groundwater predicted from a numerical model were associated with probabilistic uncertainties due to the randomness in modeling input parameters, while the consequences of contaminant concentrations violating relevant environmental quality guidelines and health evaluation criteria were linked with fuzzy uncertainties. The contaminant of interest in this study was xylene. The environmental quality guideline was divided into three different strictness categories: "loose", "medium" and "strict". The environmental-guideline-based risk (ER) and health risk (HR) due to xylene ingestion were systematically examined to obtain the general risk levels through a fuzzy rule base. The ER and HR risk levels were divided into five categories of "low", "low-to-medium", "medium", "medium-to-high" and "high", respectively. The general risk levels included six categories ranging from "low" to "very high". The fuzzy membership functions of the related fuzzy events and the fuzzy rule base were established based on a questionnaire survey. Thus the IFSRA integrated fuzzy logic, expert involvement, and stochastic simulation within a general framework. The robustness of the modeling processes was enhanced through the effective reflection of the two types of uncertainties as compared with the conventional risk assessment approaches. The developed IFSRA was applied to a petroleum-contaminated groundwater system in western Canada. Three scenarios with different environmental quality guidelines were analyzed, and reasonable results were obtained. The risk assessment approach developed in this study offers a unique tool for systematically quantifying various uncertainties in contaminated site management, and it also provides more realistic support for remediation-related decisions.     

Integrated Approach for Prioritizing Watersheds for Management: A Study of Lidder Catchment of Kashmir Himalayas

The Himalayan watersheds are susceptible to various forms of degradation due to their sensitive and fragile ecological disposition coupled with increasing anthropogenic disturbances. Owing to the paucity of appropriate technology and financial resources, the prioritization of watersheds has become an inevitable process for effective planning and management of natural resources. Lidder catchment constitutes a segment of the western Himalayas with an area of 1,159.38 km². The study is based on integrated analysis of remote sensing, geographic information system, field study, and socioeconomic data. Multicriteria evaluation of geophysical, land-use and land-cover (LULC) change, and socioeconomic indicators is carried out to prioritize watersheds for natural resource conservation and management. Knowledge-based weights and ranks are normalized, and weighted linear combination technique is adopted to determine final priority value. The watersheds are classified into four priority zones (very high priority, high priority, medium priority, and low priority) on the basis of quartiles of the priority value, thus indicating their ecological status in terms of degradation caused by anthropogenic disturbances. The correlation between priority ranks of individual indicators and integrated indicators is drawn. The results reveal that socioeconomic indicators are the most important drivers of LULC change and environmental degradation in the catchment. Moreover, the magnitude and intensity of anthropogenic impact is not uniform in different watersheds of Lidder catchment. Therefore, any conservation and management strategy must be formulated on the basis of watershed prioritization.     

Estimation and inter-comparison of dust aerosols based on MODIS, MISR and AERONET retrievals over Asian desert regions

This study presents detailed analysis of spatiotemporal variations and trend of dust optical properties i.e., Aerosol Optical Depth(AOD) and Angstrom component over Asian desert regions using thirteen years of data(i.e., 2001–2013) retrieved from Aerosol Robotic Network(AERONET), Moderate Resolution Imaging Spectroradiometer(MODIS) and Multi-angle Imaging Spectroradiometer(MISR). These regions include Solar Village, Dunhuang and Dalangzadgad and are considered as origin of desert aerosols in Asia. Mann–Kendall trend test was used to show the trend of AOD. The relationship of AOD with weather parameters and general AOD trend over different wavelengths has also been shown. AOD's trend has been observed significant throughout the year in Solar Village, while in Dunhuang and Dalanzadgad the significant trend has been found only in peak period(March–June).Analysis show high values of AOD and low values of angstrom in Solar Village during peak period. In Chinese desert regions, high values of AOD have been found during peak period and low values in pre-peak period. Significant relationship has been observed between AOD and average temperature in Solar Village and Dalanzadgad whereas rainfall and wind speed showed no significant impact on AOD in all desert regions.     

Used lubricating oil recycling using hydrocarbon solvents

A solvent extraction process using new hydrocarbon solvents was employed to treat used lubricant oil. The solvents used were liquefied petroleum gas (LPG) condensate and stabilized condensate. A demulsifier was used to enhance the treatment process. The extraction process using stabilized condensate demonstrated characteristics that make it competitive with existing used oil treatment technologies. The process is able to reduce the asphaltene content of the treated lubricating oil to 0.106% (w/w), the ash content to 0.108%, and the carbon residue to 0.315% with very low levels of contaminant metals. The overall yield of oil is 79%. The treated used oil can be recycled as base lubricating oil. The major disadvantage of this work is the high temperature of solvent recovery. Experimental work and results are presented in detail.