北京市气温与黑碳和PM2.5对疾病死亡影响的交互效应

通过收集北京市2010~2016年逐日呼吸和心脑血管疾病死亡数据、污染物（BC、PM_2.5、SO₂、O₃和NO₂）日均浓度资料以及同期的气象资料,采用广义相加模型（GAMs）中的主效应模型、非参数二元响应模型和温度分层模型探讨了北京市气温、PM_2.5和BC单效应,以及气温与PM_2.5和BC交互作用分别对呼吸和心脑血管疾病死亡人数的影响.单效应分析结果表明,气温与两种疾病死亡人数的累计暴露-反应关系均呈“J”型分布特征,最适温度为24℃;累计滞后一天情况下PM_2.5和BC的健康效应均最显著,此时PM_2.5和BC浓度每升高四分位间距（IQR）,呼吸系统疾病死亡人数超额增加百分比（ER）分别为2.21%和1.80%,心脑血管疾病死亡人数ER分别为2.02%和1.48%.交互作用的研究结果表明,高温与高浓度的PM_2.5（或BC）对疾病死亡的影响存在协同效应,且高温条件下BC对疾病死亡影响的健康风险大于PM_2.5,当气温大于24℃时,BC和PM_2.5浓度每升高IQR对应的呼吸系统疾病死亡人数ER分别为6.22%和6.17%,心脑血管疾病死亡人数ER分别为5.01%和3.97%.虽然BC只占PM_2.5的一部分,但BC对人群健康的影响不容忽视,应该引起足够的重视.     

石英灯辐射加热条件下低密度碳/酚醛复合材料高温响应及分析

目的研究低密度碳/酚醛复合材料在不同地面加热实验测试响应的差异性,指导材料在实际应用环境下的高温响应分析。方法对低密度碳/酚醛复合材料开展了热流为400 kW/m~2的单侧石英灯辐射加热实验,利用热电偶测温系统测量试件在加热过程中不同位置的温度时间历程,并对试件的烧蚀形貌和微观结构进行观测。同时与热流为464k W/m~2的氧乙炔加热陶瓷板辐射加热实验结果进行对比分析,并且采用有限元方法对材料的传热传质多场耦合计算进行分析。结果对于石英灯辐射加热,在测量点升温到接近200℃时,温度响应拐点都依次出现。由于加热的辐射热源不同,在不同的辐射波段下,多孔材料吸收和发射的热量不同,短时间内氧乙炔加热陶瓷板辐射加热使材料内部升温速率比石英灯辐射加热实验的要快,但长时间加热时现象刚好相反。结论进行传热传质多场耦合计算材料高温响应时,合理确定材料宏观性能随温度的变化至关重要。     

天津大气稳定度和逆温特征对PM2.5污染的影响

利用气象铁塔资料分析了逆温频率和强度,采用温差-风速法计算了天津地区大气稳定度,探讨了其相互关系及对PM_2.5浓度月均值和超标日的影响,并对一次重污染过程中大气稳定度和逆温分布特征进行了分析.结果表明,2015年9月~2017年8月A,B,C,D,E和F类大气稳定度发生频率依次为6.7%,11.4%,22.4%,46.1%,11.1%和2.2%,秋冬季节稳定类天气（E,F类）较多,全年白天各时段均以不稳定类大气为主,夜间大气稳定度以中性为主,秋冬季夜间稳定类高达30%~40%.观测期内冬季逆温频率最高,5：00~8：00和21：00~23：00超过90%,冬季逆温强度也最高.随着稳定类大气层结日数的增多,PM_2.5月均值和污染日数均有所增大,同时逐月PM_2.5均值、污染日发生频率均与逆温发生频率呈正相关关系.2016年12月16~21日的一次重污染天气过程显示,PM_2.5受到大气稳定度和逆温发展的影响,霾形成、雾-霾交替和消散等阶段大气稳定度和逆温特征具有显著的不同.大气持续趋于稳定及逆温强度的逐渐增大,对污染生成和维持起了非常重要的作用,污染过程中大气稳定度和逆温特征的精细化分析有助于提升重污染天气预报预警水平.     

高温条件下高速碰撞试验技术研究

目的建立高温条件下结构的高速碰撞试验技术。方法基于理论和试验方法,研究影响试样加热/保温、碰靶速度和姿态的关键因素,利用次口径发射技术和电炉技术实现试样的加热、保温和加速。采用间接方法测试试样碰靶时的温度,联合应用次口径发射技术和靶体,控制试样的碰靶姿态,并利用高速摄影技术对其进行测试。通过薄壁圆柱筒的高温高速碰靶验证高温试验技术的有效性。结果建立了加热、加速和姿态控制一体化的高温高速碰撞试验技术,获得了不同尺寸薄壁圆柱筒不同姿态碰靶时的高温冲击动力学响应。正碰时,撞击端镦粗,尾端收缩,尾端的凹陷大于碰撞端的变形;侧碰时,圆筒呈马鞍状;角碰时的变形为楔形。随着圆筒的强度和刚度的降低,圆筒的变形增加,整体发生坍塌,出现大量的皱褶。结论建立的试验技术切实有效,可以用于高温条件下结构高速碰撞效应的研究。     

环境升温过程对常温固化环氧树脂热力学性能的影响

目的提高常温固化环氧树脂体系的高温使用性能。方法采用常温固化剂T31、中温固化剂IPDA以及高温固化剂DDM作为混合固化剂,对E-44型和AG-80型混合环氧树脂体系进行常温固化反应,并分析环境升温过程对固化物热力学性能的影响。通过DMA分析、热变形测量、固化度测试,分别评价室温固化环氧树脂在环境升温过程前后的玻璃化转变温度、热变形量及体系内部的固化反应程度变化,并通过吸水率测试和弯曲强度测试对玻璃纤维布增强常温固化环氧树脂基复合材料的耐湿热性能以及高温条件下的力学性能进行分析。结果环氧树脂常温固化物的tg为85.21℃,经1.5℃/min的平均升温速率加热至90℃之后,该环境升温过程使固化物的固化度增大至92%以上,tg增长为132.06℃的同时热变形温度增大。其复合材料耐湿热性能提高,且100℃时弯曲强度的保持率为65%,对于加热至120℃的环境升温过程,固化物的固化度接近96%,tg增长为144.45℃的同时热变形温度进一步提高,其复合材料耐湿热性能改善程度更加明显,且130℃时弯曲强度保持率仍接近60%。结论常温、中温、高温混合固化剂的合理复配有助于环氧树脂体系在环境升温变化的诱导条件下发生梯度式固化反应,使体系内部的交联固化程度迅速升至较高水平,可以有效提高其玻璃化转变温度,显著改善常温固化环氧树脂体系在高温条件下的热力学性能。     

纳米TiO2/CNTs复合材料的制备及其光学性质

TiO2在碳纳米管上的复合材料可以增加材料的光催化性能,已成为新的研究热点.本文采用低温液相法成功地合成了TiO2/CNTs复合材料,并用TEM、XRD和UV-vis对材料进行了表征,结果表明,TiO2很好地分散在CNTs上,具有显著的催化效果,有很好的应用前景.     

干旱区2种猪毛菜萌发过程对水盐胁迫的生态响应

在实验室内模拟研究的基础上,运用生理生态学的原理,研究了水盐胁迫对钠猪毛菜(salsola nitraria)和散枝猪毛菜(salsola brachiata)种子萌发的影响,结果显示,钠猪毛菜与散枝猪毛菜种子萌发的最适温度分别为25 ℃和15 ℃.在盐溶液和PEG溶液中,2种种子的萌发规律相似,即随着水势的降低,萌发率和萌发速率下降.在盐胁迫下钠猪毛菜和散枝猪毛菜种子萌发的最低水势接近-7.2 MPa;在水分胁迫下2种种子萌发的最低水势均未超过-2.0 MPa,其中,钠猪毛菜种子表现出较强的耐水分胁迫能力.在相同水势条件下,PEG对2种猪毛菜种子萌发的抑制程度显著大于等渗NaCl,说明渗透胁迫是影响2种植物种子萌发的主要因素.     

The importance of temperature in assessing iron pipe corrosion in water distribution systems

Temperature is expected to play a significant role in the corrosion of iron pipes in drinking water distribution systems. Temperature impacts many parameters that are critical to pipe corrosion including biological activity, physical properties of the solution, thermodynamic and physical properties of corrosion scale, and chemical rates. Moreover, variations in temperature and temperature gradients may give rise to new corrosion phenomena worthy of consideration by water treatment personnel.     

A study on the orbit of air temperature movement

In this paper, we describe an air temperature movement by mapping its time series to the polar coordinates: the value of the time series is plotted on the radial coordinate and the time on the angular coordinate. In this way, both the yearly and daily air temperature movements from five different locations of China are used to demonstrate that, in an intuitionistic view, air temperature movement is neither random nor chaotic, but has its own orbit. We then propose an elliptic orbit model for the air temperature movement. Our proposed model provides quite good results when it is applied to the evaluation of yearly air temperature movements in eight locations in various parts of the world, and the evaluation of daily air temperature movements in five locations in Hunan Province of China on December 17, 2005. Results show that our approach provides a concise and helpful model for air temperature analysis.     

Effect of temperature on single and competitive adsorptions of Cu(II) and Zn(II) onto natural clays

This study conducted a combined adsorption-sequential extractionanalysis (CASA), by which five phases (i.e., exchangeable, carbonate, Mn-Oxide, organic, and Fe-Oxide phases) of adsorbed heavy metals were analyzed, to investigate temperature effects on single and competitive adsorptions of Zn(II) and Cu(II) ontonatural clays. In the case of single adsorption of Zn, the exchangeable phase adsorption decreased from 65 to 40%, but thecarbonate phase adsorption increased from 30 to 40%, with an increase in temperature from 15 to 55 °C. However, in itscompetitive adsorption with Cu, Zn was mostly present in the exchangeable phase (over 90%), and with an increase in temperature, the exchangeable phase adsorption decreased only 10%. In the case of Cu, over 50% among the total amount of adsorption was present in the carbonate phase in both cases ofsingle and competitive adsorptions. The carbonate phaseadsorption of Cu increased from 56 to 61% and from 60 to 66% in single and competitive adsorptions, respectively, with atemperature increase. These results show that in the case of Zn,the major mechanism of retention in natural clay soils might beexchangeable phase adsorption, especially in the case of competitive adsorption with Cu. However, in the case of Cu, the major mechanism might be carbonate phase adsorption, which is known to be a more immobile phase than exchangeable phase adsorption. It seems that the adsorption of Zn and Cu onto natural clays is an endothermic reaction, which represents thatthe adsorption equilibrium constants and capacities increase with a temperature increase, with the exception of exchangeablephase adsorption.