响应面法优化黄粉虫幼虫处理餐厨垃圾饲养条件的研究

研究了黄粉虫幼虫处理餐厨垃圾的方法.首先在饲养温度、饲料含水量和饲养密度等条件下进行单因素实验,然后,以利用率为指标,运用响应面法优化了黄粉虫幼虫处理餐厨垃圾的饲养条件,结果表明,最佳饲养条件为饲养温度26.7℃、饲料含水量14.5％、饲养密度4.1头/cm2.在此饲养条件下,黄粉虫对餐厨垃圾利用率理论值为38.72％,实际餐厨垃圾利用率为38.88％,相对误差为0.41％,说明利用黄粉虫幼虫处理餐厨垃圾具有较好的效果.     

A stochastic approach for risk analysis in vapor cloud explosion

A stochastic approach for evaluating the risk of vapor cloud explosions is proposed in this work. The proposed methodology aims to incorporate the effect of uncertainty into the risk analysis to produce a better overall view for the risk. Some stochastic variables are used to estimate the probability of vapor cloud explosions: frequency of the release, the probability of not having an immediate ignition, the probability of delayed ignition and the probability of a vapor cloud explosion given a delayed ignition, as well as different possible meteorological conditions. These stochastic variables are represented with probability distribution curves. Different curves for the frequencies of releases from process equipment types (steel process pipes, flanges, manual valves, actuated valves, etc.), different equipment diameters and different leak sizes are also used in this analysis. Monte Carlo simulation is performed to obtain the risk as a probability distribution using the Analytic Solver Platform. Then the risk distribution curve obtained by Monte Carlo simulation is used to estimate the probability of satisfying the risk tolerance criterion.     

Bitter coil design methodology for electromagnetic pulse metal processing techniques

Electromagnetic pulse metal processing techniques (EPMPT) such as welding, forming and cutting have proven to be an effective solution to specific manufacturing problems. A high pulse magnetic field coil is a critical part of these technologies and its design is a challenging task. This paper describes a Bitter coil design using a newly developed methodology for a simplified analytical calculation of the coil and complementary finite element models (FE) of different complexity. Based on the methodology a Belgian Welding Institute (BWI) Bitter coil has been designed and tested by means of short circuit experiments, impedance and B-field measurements. A good agreement between the calculated and the experimental design parameters was found.     

Research on transesterification parameters for producing plant sterols with supercritical methanol

The supercritical fluid method, regarded as a type of individual production process in the course of preparing plant sterols, has become a promising technology, which possesses advantages of high conversion rate without any pretreatment and need of a catalyst. This study examined the reaction process of the deodorizer distillate (DOD), which mainly included the direct transesterification of DOD to convert into free sterols. The effects of the ratio of methanol to DOD, reaction temperature and time on transesterification were studied. Furthermore, the interactions between different factors were also assessed using the response surface methodology. The optimal conditions obtained were as follows: reaction temperature 553 K, reaction time 80 min, and CH₃OH: DOD = 25:1 (mass ratio). Under these conditions, 36.42% sterol concentration was obtained, which is significantly higher in comparison with the initial sterols’ concentration in raw material (22.45%).     

中国环境基准研究重点方向探讨

环境基准是环境标准的科学依据,在国家环境质量评价和风险管理体系中处于基础地位。它主要是依据特定对象在环境介质中的暴露数据,以及与环境要素的剂量效应关系数据,通过科学判断得出的,涉及环境化学、毒理学、生态学、流行病学、生物学和风险评估等前沿学科领域。国家环境基准研究是一个长期的系统工程,本文基于环境基准研究的学科特点和国际前沿,结合国家科技需求和相关领域的研究现状,综合分析并提出了未来中国环境基准研究的重点研究方向:1)环境基准的理论与方法学;2)环境基准基础数据库;3)基准目标污染物的筛选甄别和优先排序技术;4)水体营养物基准;5)生物测试与毒性评价技术;6)人体暴露评价理论与相关技术;7)环境基准的审核和校对;8)环境基准与标准转化理论及其对环境管理支撑技术。本文从环境基准学科发展的角度,阐述了与环境基准研究紧密相关的8个重点研究方面的国内外研究进展、关键科学问题以及未来重点研究内容。同时指出,这些重要的研究方向是环境基准研究的根本,未来环境基准的长期战略发展必将是建立在各个重要方向长足发展的基础之上,环境基准研究也必带动这些方向的共同蓬勃发展,为环境地球化学、毒理学、生态学等学科领域发展注入活力。     

微波诱导热解法制备落叶吸附剂及其工艺优化

采用微波诱导热解法制备低成本落叶吸附剂,以实现落叶的资源化利用.以碘吸附值为响应值,采用响应面分析法研究了微波诱导热解法制备落叶吸附剂的工艺条件.结果表明,热解时间与微波功率之间存在交互作用,当热解功率增加时,可适当缩短热解时间.落叶吸附剂的最佳制备工艺条件为:热解时间4.04 min,微波功率488.72W,氯化锌质量分数27％.落叶吸附剂以微孔吸附为主,BJH孔径分布较窄,孔容最高峰对应的孔径在1.9 nm左右,Langmuir比表面积为769.61 m2/g.     

响应面法优化预氧化强化混凝处理铁锰地下水

以KMnO_4为氧化剂,Al_2(SO_4)_3·18H_2O为混凝剂,含铁锰离子地下水为模拟用水,考察预氧化强化混凝法的效果。利用响应面设计试验,分析氧化剂投加量、混凝剂投加量和pH值对铁锰去除的交互作用。模型优化结果显示,在氧化剂投加量4.16 mg/L,混凝剂投加量263.68 mg/L,pH值为7.54的最佳工艺参数下,铁锰去除率分别可达98.22%和97.49%。     

Systematic review on the implementation methodologies of inherent safety in chemical process

The accomplishments of inherent safety in the field of loss prevention thus far are impressive due to its scientific philosophy: reducing risks at source rather than adding engineered and procedural protections. Generally, the implementation of inherent safety can be done through a cohesive set of fourteen principles elucidated by Kletz and Amyotte. This work, guided by the fourteen principles, presents a systematic review on the implementation methodologies of inherent safety. Firstly, PRISMA procedure was adopted to select eligible literatures according to inclusive and exclusive criteria. After obtaining the selected literatures, the preference, level of application, and gaps in using these principles were critically analyzed. Of the fourteen principles, intensification, substitution, attenuation, simplification, limitation of effects, and avoidance of knock-on effects are preferable to implementing inherent safety in chemical process. Although the remaining principles are also potentially useful, they are not commonly used due to their costs and complexities of implementation. Overall, this work presents a complete spectrum to look across the implementation methodologies of inherent safety and concludes with some holistic and inclusive approaches as future research recommendations.     

微生物絮凝剂M-C11处理高岭土悬浊液的响应曲面优化

采用响应曲面法对微生物絮凝剂M-C11处理高岭土悬浊液的过程参数进行优化,选取中心复合实验设计(CCD),以p H、M-C11投加量和Ca Cl2投加量等因素为自变量,以处理后的高岭土悬浊液絮凝率(Fr)为响应值,并借助扫描电镜对絮凝剂的作用机理进行初步探讨。结果表明,微生物絮凝剂M-C11可显著改善高岭土悬浊液的絮凝性能,且选取的3种单因素水平均可影响絮凝剂活性。经多元回归拟合分析,在M-C11投加量为2.56 m L,Ca Cl2投加量为0.37 g/L的最优条件下,微生物絮凝活性实验值可达92.37%,接近模型预测值(92.30%)。Ca Cl2投加量对絮凝效果的影响高于M-C11投加量(PCa Cl2相似文献   

Multi-response optimization of Fenton process for applicability assessment in landfill leachate treatment

Fenton process, as a pretreatment method, was found to be effective in the primary treatment of mature/medium landfill leachate. However, the main problem of the process is the large amount of produced sludge that requires an accurate feasibility evaluation for operational applications. In this study, the response surface methodology was applied for the modeling and optimization of Fenton process in three target responses, (1) overall COD removal, (2) sludge to iron ratio (SIR) and (3) organics removal to sludge ratio (ORSR), where the latter two were new self-defined responses for prediction of sludge generation and applicability assessment of the process, respectively. The effective variables included the initial pH, [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage. According to the statistical analysis, all the proposed models were adequate (with adjusted R² of 0.9116–0.9512) and had considerable predictive capability (with prediction R² up to 0.9092 and appropriate adequate precision). It was found that all the variables had significant effects on the responses, specifically by their observed role in dominant oxidation mechanism. The optimum operational conditions obtained by overlay plot, were found to be initial pH of 5.7, [H₂O₂]/[Fe²⁺] ratio of 17.72 and [Fe²⁺] of 195 mM, which led to 69% COD removal, 2.4 (l sludge/consumed mole Fe²⁺) of SIR and 16.5 (gCOD removed/l produced sludge) for ORSR in verification test, in accordance with models-predicted values. Finally, it was observed that [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage had significant influence on COD removal, while Fe²⁺ dosage and [H₂O₂]/[Fe²⁺] ratio had remarkable effects on SIR and ORSR responses, respectively.