Preparation and Characterization of Biodegradable Blend Membranes of PBS/CA

Asymmetric membranes of cellulose acetate/poly (butylene succinate) were prepared using immersion precipitation technique. The blended membranes were characterized by contact angle, scanning electron microscopy, thermogravimetric analysis, degradation test in compost and dynamic test of raisin wastewater treatment. Results demonstrated that hydrophilicity of cellulose acetate was enhanced by addition of poly (butylene succinate) up to 50 %. Furthermore, polymeric composition affects cross sectional structure of the membranes by controlling formation of macrovoids. Addition of poly (butylene succinate) improved the membranes thermal stability and obviously their degradation in compost. The prepared membranes were able to reject the wastewater pollutants properly.     

Performance evaluation of a bipolar electrolysis/electrocoagulation (EL/EC) reactor to enhance the sludge dewaterability

The present study aimed to evaluate the performance of a bipolar electrolysis/electrocoagulation reactor designed to enhance the sludge dewaterability. The reactor was 15 L in volume, with two series of plates used in it; Ti/RuO₂ plates for the electrolysis of the sludge, and also aluminum and iron plates for electrocoagulation process. The dewaterability of the sludge was determined in terms of its capillary suction time (CST) and specific resistance to filtration (SRF), while the degree of sludge disintegration was determined based on the value of degree of sludge disintegration (DD_SCOD). The maximum reduction in CST and SRF was observed at a detention time of 20 min and a voltage of 30 V. However, increasing of both detention time and voltage significantly increased the values of CST and SRF even to an extent that they both exceeded those of the untreated sludge. The optimal degree of sludge disintegration achieved by the present study was 2.5%, which was also achieved at a detention time of 20 min and a voltage of 30 V. As reported previously, increased DD_SCOD values led to increasing CST and SRF values, due primarily to the disruption of the sludge flocs. According to the results from the present study, it can be concluded that simultaneous application of electrocoagulation and electrolysis is effective in enhancing the sludge dewaterability, because electrocoagulation helps to achieve a higher degree of sludge disintegration while maintaining the desired sludge dewaterability.     

Applicability of universal Bacteroidales genetic marker for microbial monitoring of drinking water sources in comparison to conventional indicators

Water quality monitoring is essential for the provision of safe drinking water. In this study, we compared a selection of fecal indicators with universal Bacteroidales genetic marker to identify fecal pollution of a variety of drinking water sources. A total of 60 samples were collected from water sources. The microbiological parameters included total coliforms, fecal coliforms, Escherichia coli and fecal streptococci as the fecal indicator bacteria (FIB), Clostridium perfringens and H₂S bacteria as alternative indicators, universal Bacteroidales genetic marker as a promising alternative fecal indicator, and Salmonella spp., Shigella spp., and E. coli O157 as pathogenic bacteria. From 60 samples analyzed, Bacteroidales was the most frequently detected indicator followed by total coliforms. However, the Bacteroidales assay failed to detect the marker in nine samples positive for FIB and other alternative indicators. The results of our study showed that the absence of Bacteroidales is not necessarily an evidence of fecal and pathogenic bacteria absence and may be unable to ensure the safety of the water. Further research, however, is required for a better understanding of the use of a Bacteroidales genetic marker as an indicator in water quality monitoring programs.     

Concentration of four heavy metals (cadmium, lead, mercury, and arsenic) in organs of two cyprinid fish (Cyprinus carpio and Capoeta sp.) from the Kor River (Iran)

Concentration of heavy metals in aquatic animals mainly occurs due to industrial contamination. In this study, the concentrations of four heavy metals (cadmium, lead, mercury, and arsenic) in organs of two cyprinid fish and in water collected from three sections of the Kor River, Iran were determined using the inductively coupled plasma method. Pathological and hormonal changes due to metal contamination were also measured. The concentrations of heavy metals in tissue of fish from the middle sampling zone were significantly higher (p?<?0.05) than those from the other two sampling zones, whereas no significant differences (p?>?0.05) were detected between the two sexes and species. High levels of metals were found in the ovaries and testes; estradiol in females and progesterone and testosterone in males from the middle study site were significantly (p?<?0.05) lower than values from the other two sites. Pathological changes in blood cells, liver, and kidneys of fishes were significantly higher in highly polluted areas (middle sampling zone). These results show that industrial activities have polluted the river and that the maximum concentrations of Cd, Pb, and Hg were higher than the permissible levels for human consumption.     

Quantification of human adenovirus in irrigation water-soil-crop continuum: are consumers of wastewater-irrigated vegetables at risk?

Environmental Science and Pollution Research - Because of health concerns regarding the presence of enteric viruses in wastewater effluents, this study was designed to investigate the occurrence of...     

A Comparison of Modified and Unmodified Cellulose Nanofiber Reinforced Polylactic Acid (PLA) Prepared by Twin Screw Extrusion

The goal of this work was to evaluate the effect of chemical modification of cellulose nanofibers (CNF) on the properties of polylactic acid (PLA) nanocomposites. Acetylated nanofibers (ACNF), with degree of substitution 1.07, were isolated from acetylated kenaf fibers by mechanical treatments. Acetylated nanofibers showed more hydrophobic properties compared to non-acetylated ones. The results showed that both crystallinity and thermal stability of acetylated nanofibers were lower than non-acetylated ones. The nanocomposites were prepared by premixing two PLA master batches, one with a high concentration of ACNF and the second with CNF. These were diluted to final concentrations (5?wt%) during the extrusion. The morphology studies of PLA and its nanocomposites showed nanofiber aggregates in both materials. The results showed that the tensile and dynamic mechanical properties were enhanced for both acetylated and non-acetylated nanocomposites compared to the neat PLA matrix while no significant improvement was observed for the acetylated nanocomposites compared to non-acetylated ones. However, the storage modulus increased slightly for acetylated nanocomposites compared to non-acetylated ones.     

Modified dehydrogenase enzyme assay for evaluation of the influence of Hg,Cd, and Zn on the bacterial community structure of a wastewater treatment plant

In this study, a traditional assay was modified to evaluate the effect of Hg, Cd, and Zn on the bacterial community of a sequencing batch reactor and activated sludge plants and heavy metal-resistant bacterial species were determined. After the isolation of metal-resistant bacteria, their 16S rRNA gene fragments were sequenced. The BLAST program was used to compare the resulting 16S rRNA sequences with those in GenBank database to identify the isolated bacterial species. Hg was found to be the most toxic metal for both bacterial communities investigated. Sequence batch reactor bacteria were comparatively more resistant to Hg, Cd, and Zn than those from activated sludge. The resistant strains were close to the members of genus Pseudomonas, Kocuria, Stenotrophomonas, Enterococcus, and Staphylococcus. The modified dehydrogenase enzyme assay seems to be simple, robust, and competent for evaluation of the impact of metals on bacterial activity. Sequencing batch reactor systems should be preferred over activated sludge when wastewaters containing hazardous metals are to be treated.     

An integrated multi criteria approach for landfill siting in a conflicting environmental, economical and socio-cultural area

Landfill site selection is a complicated multi criteria land use planning that should convince all related stakeholders with different insights. This paper addresses an integrating approach for landfill siting based on conflicting opinions among environmental, economical and socio-cultural expertise. In order to gain optimized siting decision, the issue was investigated in different viewpoints. At first step based on opinion sampling and questionnaire results of 35 experts familiar with local situations, the national environmental legislations and international practices, 13 constraints and 15 factors were built in hierarchical structure. Factors divided into three environmental, economical and socio-cultural groups. In the next step, the GIS-database was developed based on the designated criteria. In the third stage, the criteria standardization and criteria weighting were accomplished. The relative importance weights of criteria and subcriteria were estimated, respectively, using analytical hierarchy process and rank ordering methods based on different experts opinions. Thereafter, by using simple additive weighting method, the suitability maps for landfill siting in Marvdasht, Iran, was evaluated in environmental, economical and socio-cultural visions. The importance of each group of criteria in its own vision was assigned to be higher than two other groups. In the fourth stage, the final suitability map was obtained after crossing three resulted maps in different visions and reported in five suitability classes for landfill construction. This map indicated that almost 1224 ha of the study area can be considered as best suitable class for landfill siting considering all visions. In the last stage, a comprehensive field visit was performed to verify the selected site obtained from the proposed model. This field inspection has confirmed the proposed integrating approach for the landfill siting.     

Portland cement solidified construction waste using MSW leachate and phosphate admixtures

Journal of Material Cycles and Waste Management - Many dumping sites all over the world release leachate into the environment. The primary goal of this study was to convert raw municipal...     

Porous materials for the recovery of rare earth elements,platinum group metals,and other valuable metals: a review

Environmental Chemistry Letters - The demand for valuable metals such as rare earth elements and platinum group metals is rising fast in the context of the&nbsp;depletion of natural resources...