Effect of a global warming-induced increase in typhoon intensity on urban productivity in Taiwan

A number of scientists have recently conducted research that shows that tropical cyclone intensity is likely to increase in the future due to the warming effect of greenhouse gases on surface sea temperatures. The aim of this paper is to establish what would be the likely decrease in the productivity of urban workers due to an increase in tropical cyclone-related downtime. The methodology used simulates future tropical cyclones by magnifying the intensity of historical tropical cyclones between the years 1978 and 2008. It then uses a Monte Carlo simulation to obtain the expected number of hours that a certain area can expect to be affected by winds of a given strength. It shows how annual downtime from tropical cyclones could increase from 1.5% nowadays to up to 2.2% by 2085, an increase of almost 50%. This decrease in productivity could result in a loss of up to 0.7% of the annual Taiwanese GDP by 2085.     

Environmental impact assessment on production and material supply stages of lithium-ion batteries with increasing demands for electric vehicles

Journal of Material Cycles and Waste Management - Battery electric vehicles (BEVs) and hybrid electric vehicles (HEVs) have been expected to reduce greenhouse gas (GHG) emissions and other...     

Fabrication of bulk materials with zeolite from coal fly ash

After packing a compact of coal fly ash mixed with 3.5?M (mol/L) sodium hydroxide solution into a cylindrical plastic mold at 80?°C and 50?% relative humidity for 24?h, the plastic mold was released and the compact was immersed in 3.5?M sodium hydroxide solution at 80?°C for 48?h. When the resultant compact was removed from the solution and cured at 80?°C and 50?% relative humidity for 7?days, a bulk material with zeolite was formed. The strength of the resultant bulk material was a result of the formation of geopolymer (alkali-activated cement). The specific surface area and the compressive strength of the bulk body sample were 21.4?m²/g and 29.0?MPa, respectively. According to a quantitative analysis conducted using the X-ray diffraction (XRD) technique, the content of the formed Na-P type zeolite was estimated to be approximately 28.2?% in mass ratio. The pore size of the resultant bulk materials with zeolite ranges from sub-nanometer to several tens of nanometers, so the resultant bulk material with zeolite exhibited excellent water vapor retention characteristics.     

Validation of diffusive mini-samplers for aldehyde and VOC and its feasibility for measuring the exposure levels of elementary school children

Exposure to various chemicals can cause adverse effects to health, such as asthma and allergies, especially in children. Data on personal exposure levels in children are scarce, thus small lightweight diffusive mini-samplers for aldehydes and volatile organic compounds (VOCs) were designed to measure the exposure level of children to these chemicals. The aim of the study was to validate and examine the applicability of these mini-samplers for measuring daily chemical exposure. The diffusive mini-samplers are 20 mm in length, 11 mm in diameter, and 1.67 g in weight. The devices are cylindrically shaped with polytetrafluoroethylene membrane filters placed at each end. To measure aldehydes and acetone, 20 mg of 2,4-dinitrophenylhydrazine was used as an absorbent. To measure VOCs, a carbon molecular sieve was used. The sampling rate for each chemical was determined by parallel sampling with active samplers in a closed exposure bag. The blank levels of the chemicals and the storage stability of the device were tested. The mini-samplers were compared to commercially available diffusive samplers. To examine the applicability of the samplers, 65 elementary school children carried them for 24 h. The sampling rates for formaldehyde, acetaldehyde, and acetone were 20.9, 22.9, and 19.7 mL min(-1), respectively. The limits of quantification (LOQ) for the 24-hour sampling by high-performance liquid chromatography/ultraviolet (HPLC/UV) analysis were 8.3, 7.6, and 8.8 μg m(-3) for formaldehyde, acetaldehyde, and acetone, respectively. The sampling rates for the 11 VOCs were determined and ranged from 3.3 mL min(-1) for styrene and 2-ethyl-1-hexanol to 11.7 mL min(-1) for benzene. The LOQ for the 24-hour sampling by gas chromatography-mass spectrometry (GC-MS) analysis ranged from 5.9-105.2 μg m(-3), 1.1-24.7 parts per billion. The storage stability after 5 days ranged from 94.8 to 118.2%. Formaldehyde, acetone, benzene, and toluene were detected above the LOQ in more than 90% of the children, and the median concentrations were 21.7, 20.9, 10.1, and 21.5 μg m(-3), respectively. This study shows that the diffusive samplers developed were suitable for children to carry and were capable of measuring the children's daily chemical exposure.     

Mineral content of drinking water in lowland papua

This study presents concentration of nine minerals (Na, K, Mg, Ca, Cl, Mn, Zn, Cd, Pb) in 31 drinking water samples collected in the Papua New Guinea lowland, where coastal villagers draw water from artificial wells blended with sea water, riverside villagers utilize brackish river water, and inland villagers fetch creek or swamp water whose chemical composition is close to rain water. During the dry season, the coastal well water contains 500 mgL⁻¹ of sodium and 50–90 μgL⁻¹ of lead. The inland creek or swamp water contains very small amount of minerals; on the average, for instance, 0.64 mgL⁻¹ of magnesium, 0.84 mgL⁻¹ of calcium, and 4.78 mgL⁻¹ of water hardness (as CaCO₃). From some epidemiological evidence in industrialized countries, these mineral concentrations are judged to be indicative of high risk of cardiovascular disorders.