Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.     

牛骨炭对水溶液中Hg（Ⅱ）吸附性的研究

以牛骨为原料,氯化锌为活化剂制备牛骨基炭,通过静态吸附试验研究了牛骨炭对水中Hg（Ⅱ）的吸附效果并确定了影响吸附性能的因素。研究结果表明：牛骨炭对Hg（Ⅱ）的最佳吸附时间约为2h、吸附温度为25℃、pH值为1、投加量为0．1g、吸附溶液的最大初始浓度为600mg／L,其最大吸附容量Q^0为43．1mg／g,吸附行为符合Freundl—ich吸附等温模型;通过BET分析和扫描电镜（SEM）等手段表征了牛骨炭的孔结构参数及形貌特征,经分析,所制备牛骨炭的孔径分布为中孔。     

Effects of Smoke Emissions from a Charcoal Kiln on the Functioning of Forest Soil Systems: A Microcosm Study

Long-term charcoal production in small private charcoal kilns (CK) in Eastern Bieszczady Mts. (SE Poland) can cause local smoke contamination of the ambient forest environment. Responses of model soil systems, contaminated or not contaminated by CK smoke, to contrasting combinations of hydrothermic regimes were compared in laboratory microcosms (respiration of soil community, decomposition rate of soil organic matter and cotton stripes, herb seeds germination were studied). The majority of the obtained data show a markedly higher level of soil biological activity in the CK versus the control series. In some cases CK and control soil systems show different patterns of reactions to the tested combinations of microclimate regime. These phenomena should at least partly be attributed to the effects of CK pollution.     

Diffusion mechanism of lindane into wood charcoal

Abstract

The wood charcoal treated by 1N HNO₃ (WCT) was used to remove toxic chlorinated pesticide lindane (y‐HCH) residue from water by the sorption process. Using a simple first order reversible kinetics constants and half time equations, the film and pore diffusion coefficients were determined. Film diffusion was found to be rate limiting step in sorbing lindane by WCT. This was further authenticated by kinetics studies at different initial sorbate concentrations, different sorbent sizes, and different agitation speeds besides interruption test. A pore diffusion model was used to fit the data of kinetics in continuously mixed batch reactors (CMBR), and the tortuosity, external resistance, and surface diffusion effects on lindane sorption by WCT were noticed. The tortuosity values of 15 to 28 were obtained for WCT‐lindane system.     

聚丙烯基高分子功能材料吸附卷烟烟气中多种有害成分的应用

为了寻找能同时降低卷烟烟气中甲醛、乙醛、巴豆醛和颗粒物有害成分含量的离子交换树脂吸附材料,采用电镜扫描方法观察聚丙烯基阳离子树脂高分子功能材料的表面特征,应用压汞法分析其平均孔径、中值孔径、比孔容和比表面积,并测试了该材料的交换容量,采用环境试验舱检测法对比测试了该材料和活性炭降低卷烟烟气中甲醛、乙醛、巴豆醛和颗粒物有害成分含量的效果.结果表明,聚丙烯基高分子功能材料表面多斑点状突起,凹凸状明显,微孔和缝隙多,平均孔径为0.26 μm,中值孔径为149.3 μm,比孔容为19.23 cm3/g,比表面积为293.42 m2/g,交换容量为5.16 mmol/g,对烟气中甲醛、乙醛、巴豆醛和颗粒物的净化率分别达到79.6％、79.8％、82.8％和64.7％,而活性炭的净化率分别为20.3％、0、6.4％和54.2％.研究表明,该聚丙烯基高分子功能材料具有物理吸附和化学吸附性能,净化卷烟烟气中多种有害成分的效果明显优于活性炭.     

气相色谱法测定室内空气中挥发性卤代烃

建立了活性炭吸附-溶剂解吸-气相色谱测定室内空气中7种挥发性卤代烃的分析方法。样品经活性炭采样管富集后,用二硫化碳解吸,Agilent HP-1色谱柱分离,使用带有电子捕获检测器的气相色谱仪测定,以保留时间定性,外标法定量。当采样体积为10 L时,方法检出限范围是0.03~0.18 g/m3,加标回收率在72%~114%之间,相对标准偏差小于15%。结果表明,该方法可以应用于室内空气中痕量挥发性卤代烃样品的检测分析。     

竹炭对微污染水中有机污染物的吸附

测定了竹炭对微污染水源水中CODMn,UV254,UV410的去除效果,研究了竹炭粒径、竹炭用量、吸附时间、溶液pH值对竹炭吸附特性的影响,并由正交试验确定出竹炭去除水中CODMn,UV254,UV410的最佳吸附条件。研究表明,粒径越小,竹炭的吸附效果越好;竹炭用量为100mg、吸附时间为1h时,竹炭对各指标去除率最高;弱酸条件对竹炭对各指标的吸附最有利,当pH值=4时竹炭对各指标的去除率最大;正交试验确定出动态吸附最佳操作条件为：竹炭粒径为100～200目,质量为100mg,振荡吸附1h,原水pH值为4。     

优化热脱附技术对十溴联苯醚污染土壤的适用性及修复效果

为了探索绿色、高效、环保的修复PBDEs污染土壤的技术,在热脱附技术基础上将木炭同时作为尾气吸附剂和燃烧热源,处理不同十溴联苯醚污染水平的PBDEs(多溴联苯醚)污染土壤,通过14种不同溴代PBDEs同系物分析十溴联苯醚的降解产物组分并计算其去除率. 结果表明:在热脱附技术处理后,十溴联苯醚初始污染水平分别为500、800和1 000 μg/kg,污染土壤中PBDEs的去除率分别为63%、81%、94%. 14种不同溴代PBDEs同系物在热脱附反应后的残留产物中均有检出,其中热脱附处理后的土壤中以三溴和四溴PBDEs产物占优势,而尾气中则以四溴和五溴PBDEs产物为主. 根据热脱附试验前后土壤中PBDEs的结构组成对比及分析可知,降解和脱溴反应在整个热脱附反应过程中发挥了重要作用. 另外,XAD树脂吸附柱中虽有少量的氯代和溴代二英类物质(PCDD/Fs和PBDD/Fs)被检出,但其毒性当量浓度均小于0.1 ng/m3,符合欧盟、日本及我国所规定的二英物质排放标准. 研究显示,在利用优化的热脱附技术修复十溴联苯醚污染土壤过程中,PBDEs的去除率与污染土壤中其污染水平相关,并且热脱附过程以降解及逐级脱溴反应为主.      

活性炭对两种生物染料脱色效果的实验研究

以颗粒状活性炭为吸附载体,对两种单体生物染料进行脱色吸附实验研究。通过实验确定出最佳优化条件：活性炭用量80g/L,溶液pH值约为5、5,溶液最佳温度为35℃,搅拌速度为150rpm／min,此时染料脱色率可达98％以上;在几种条件实验过程中,将两种染料进行对比发现：红色染料脱色率一般都比绿色染料脱色率高,而且前者一般比后者反应较敏感。同时,从活性炭的表面结构方面探讨吸附脱色机理,为活性炭深度处理印染废水的研究可提供一定的科学依据。     

不同染料化合物在颗粒活性炭上的分形吸附规律

研究了颗粒活性炭对6种染料的吸附特征,结果表明,它们的吸附等温线均符合Ffendlich方程;由此计算出颗粒活性炭的表面分形维数均处于2到3之间．不同染料吸附时计算出的分形维数不同,吸附染料过程是在分形表面上发生的反应．吸附动力学过程分为快速吸附和慢吸附两个阶段,而且溶液中剩余染料的浓度变化动力学符合方程：Cout∝t^-α,表明该过程具有类分形动力学特征;并由指数α计算上述动力学反应的分形维数D．在实验的温度范围内,6种染料的吸附量和速度均随着温度的升高而增加;绿色染料吸附时的类分形动力学参数指数α和分形维数D也随之升高,而其它染料不呈现类似的规律．