Correction to: Evaluating recycling fertilizers for tomato cultivation in hydroponics,and their impact on greenhouse gas emissions

Environmental Science and Pollution Research - The average nutrient concentrations values presented in Table 1 on page 4 in the publication have the unit mg L?1 for the mineral nutrients Fe,...     

Institutional quality,financial development and sustainable economic growth among lower income countries

This article postulates strong endogenous relationships in lower income countries between institutional quality, financial development and sustained economic growth. These associations were investigated using the vector-error correction model (VECM) and Granger causality method for a sample of 79 countries from 2005 to 2022. The findings show that (1) these variables reinforce each other in the short run. (2) In the long run, both institutional quality and financial development can fuel economic growth. (3) The positive effect of institutional quality on economic growth is greater than that of financial development. Policy implications of these findings are that careful attention should be paid to co-development policies to enhance the institutional quality and the financial system in these economies. Policies should also consider economic growth strategies to enable sustainable economic growth rates.     

Conversion of waste plastics into value-added carbon materials

Plastic pollution is a major environmental issue worldwide, calling for advanced methods to recycle waste plastics in the context of the circular economy. Here we review methods and strategies to convert waste plastics into value-added carbon materials, with focus on sources, properties, pretreatment of waste plastics, and on preparation of carbon materials. Pretreatment techniques include mechanical crushing, plastic stabilization and electrospinning. Carbon materials such as carbon nanotubes, graphene, carbon nanosheets, carbon spheres and porous carbon are prepared by oxygen-limited carbonization, catalytic carbonization, the template-based method, and pressure carbonization. We emphasize the conversion of polyethene terephthalate, polyethylene, polypropylene, polystyrene, halogenated plastics, polyurethane and mixed plastics.

     

Mechanism of complexation of toxic arsenate,selenate, and molybdate with hydrotalcites

Environmental Chemistry Letters - Wastewater from the uranium mining industry contains toxic arsenate (AsO43–), selenate (SeO42–), and molybdate (MoO42–) that can be removed by...     

Simultaneous removal of cyanobacterial blooms and production of clean water by coupling flocculation with a rotary drum filter

Environmental Science and Pollution Research - A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial...     

Characterization of the incipient smoke point for steam-/air-assisted and nonassisted flares

Flares are important safety devices for pressure relief; at the same time, flares are a significant point source for soot and highly reactive volatile organic compounds (HRVOCs). Currently, simple guidelines for flare operations to maintain high combustion efficiency (CE) remain elusive. This paper fills the gap by investigating the characteristics of the incipient smoke point (ISP), which is widely recognized as the condition for good combustion. This study characterizes the ISP in terms of 100–% combustion inefficiency (CE), percent opacity, absorbance, air assist, steam assist, air equivalence ratio, steam equivalence ratio, exit velocity, vent gas net heating value, and combustion zone net heating value. Flame lengths were calculated for buoyant and momentum-dominated plumes under calm and windy conditions at stable and neutral atmosphere. Opacity was calculated using the Beer–Lambert law based on soot concentration, flame diameter, and mass-specific extinction cross section of soot. The calculated opacity and absorbance were found to be lognormally distributed. Linear relations were established for soot yield versus absorptivity with R² > 0.99 and power-law relations for opacity versus soot emission rate with R² ≥ 0.97 for steam-assisted, air-assisted, and nonassisted flares. The characterized steam/air assists, combustion zone/vent gas heating values, exit velocity, steam, and air equivalence ratios for the incipient smoke point will serve as a useful guideline for efficient flare operations.

Implications: A Recent EPA rule requires an evaluation of visible emissions in terms of opacity in compliance with the standards. In this paper, visible emissions such as soot particles are characterized in terms of opacity at ISP. Since ISP is widely recognized as most efficient flare operation for high combustion efficiency (CE)/destruction efficiency (DE) with initial soot particles formed in the flame, this characterization provides a useful guideline for flare operators in the refinery, oil and gas, and chemical industries to sustain smokeless and high combustion efficiency flaring in compliance with recent EPA regulations, in addition to protecting the environment.     

望虞河西岸九里河中四种除草剂的污染现状

基于气相色谱-质谱联用(GC-MS)法结合固相萃取(SPE)前处理技术,建立了水中4种除草剂氯草定、阿特拉津、乙草胺和异丙甲草胺残留的分析方法,于2018年春(4、5月)、秋(9、10月)和冬(1、3月)季对太湖流域望虞河西岸九里河水体中4种除草剂的污染现状进行调查分析。结果表明,4种除草剂的加标回收率为71. 2%～108%,RSD均10%,方法检出限为3. 5～6. 0 ng/L。九里河水体中氯草定、阿特拉津、乙草胺和异丙甲草胺4种除草剂质量浓度分别为未检出～0. 025 7,0. 019 1～1. 19,未检出～0. 026 0和未检出～0. 094 3μg/L。4种除草剂中阿特拉津最高值接近《地表水环境质量标准》(GB 3838—2002)限值,其他3种其值较低,氯草定首次在太湖流域水体中检出。     

Enhanced arsenate removal from aqueous solution by Mn-doped MgAl-layered double hydroxides

Environmental Science and Pollution Research - In this study, Mn-doped MgAl-layered double hydroxides (LDHs) were successfully synthesized for efficient removal arsenate from aqueous solution. The...     

Biohythane production from pineapple peel using Methanosarcina mazei enhanced with palm oil mill effluent (POME) sludge in single-stage anaerobic digestion

Biohythane production via single-stage anaerobic digestion (AD) is an effective way for sustainable energy recovery from lignocellulosic biomass. In this paper, biohythane was produced through the AD process from pineapple peel waste substrate using purely cultured Methanosarcina mazei with the enhancement of palm oil mill effluent (POME) sludge as the inoculum. This study focuses on the effects of the lignocellulosic pre-treatment method, the addition of POME sludge into M. mazei culture medium as inoculum, and various operational conditions (food to microorganisms (F/M) ratios, temperature, pH) on gas production performances. The experimental results indicate that these parameters influenced the efficiency of biohythane production by producing the peak maximum biohythane production rate values (HPR_max) and (MPR_max), H₂:CH₄ = 1.93:0.67 L/L-d, and biohythane yield (HY) and (MY), H₂:CH₄ = 1.18:0.55 mL/L-substrate. This study demonstrates that biohythane gas (H₂ + CH₄ + CO₂) production from pineapple waste can be accelerated by M. mazei only with the enhancement of POME sludge through single-stage AD system under mesophilic batch process conditions.     

Towards saving freshwater: halophytes as unconventional feedstuffs in livestock feed: a review

Water represents 71% of all earth area and about 97% of this water is salty water. So, only 3% of the overall world water quantity is freshwater. Human can benefit only from 1% of this water and the remaining 2% freeze at both poles of earth. Therefore, it is important to preserve the freshwater through increasing the plants consuming salty water. The future prosperity of feed resources in arid and semi-arid countries depends on economic use of alternative resources that have been marginalized for long periods of time, such as halophytic plants, which are one such potential future resource. Halophyte plants can grow in high salinity water and soil and to some extent during drought. The growth of these plants depends on the contact of the salted water with plant roots as in semi-desert saline water, mangrove swamps, marshes, and seashores. Halophyte plants need high levels of sodium chloride in the soil water for growth, and the soil water must also contain high levels of salts, as sodium hydroxide or magnesium sulfate. There are many uses for halophyte plants, including feed for animals, vegetables, drugs, sand dune stabilizers, wind shelter, soil cover, wetland cultivation, laundry detergents, and paper production. This paper will focus on the use of halophytes as a feed additive for animals. In spite of the good nutritional value of halophytes, some anti-nutritional factors as nitrates, nitrite complexes, tannins, glycosides, phenolic compounds, saponins, oxalates, and alkaloids may be present in some of them. The presence of such anti-nutritional agents makes halophytes unpalatable to animals, which tends to reduce feed intake and nutrient use. Therefore, the negative effects of these plants on animal performance are the only objection against using halophytes in animal feed diets. This review article highlights the beneficial impact of considering halophytes in animal feeding on saving freshwater and illustrates its nutritive value for livestock from different aspects.